AiBot X6 – AiBotix

Результат пошуку зображень за запитом "aibot X6 (airbotix)"

The Aibot X6 is an autonomously flying hexacopter, specifically designed for demanding tasks in surveying, industrial inspection, agriculture and forestry. Equipped with a high level of artificial intelligence, this UAV reaches any target and can independently create high resolution images and videos. An unmatched feature of the Aibot X6 offers the possibility to adapt varying kinds of sensors such as hyper- and multi-spectral sensors, infrared and thermal sensors, and sensors for other industry-specific missions.

A new spin on photogrammetry
Surveying of the future is not fixed and static, but dynamic and flexible. With the data captured by the Aibot X6 commercial UAV and the software solutions of Aibotix and Hexagon, you can generate orthophotos, 3D models and high-density point clouds with great accuracy. The flight planning software Aibotix AiProFlight makes it simple to obtain all the parameters essential for proficient photogrammetry.

Industrial UAV with HP GNSS module

Simple and efficient data capture from the air

  • Survey simply, efficiently and economically from the air going to places that conventional equipment cannot reach
  • Plan the route ahead of your flight and make the Aibot X6 automatically fly along the defined route
  • Take high-resolution, geo-referenced photographs or other sensor data of the targeted area
  • Ensure sufficient image overlap, adequate airspeed, and fully automatic image capture based on the requirements of the sensor
  • Photograph vertically (nadir) or at an angle (oblique), and change flight altitude and camera angle during the flight as required
  • Increase the safety and efficiency of your inspection staff
  • Get a premium product developed and produced in Germany

Wide range of applications

  • Site surveying for quarries, sand pits, landfills, coal stockpiles, etc.
  • Inspection of overhead power lines and transmission towers, wind turbines, photovoltaic systems, bridges, dams, buildings, oil and gas pipelines, and railroad tracks
  • Analysis of sites as basis for development plans and monitoring of construction sites for documentation purposes
  • Data generation for point clouds, aerial images, volume calculations, GM creation, location and inventory plans, topographic images, and planning fundamentals
  • Thermal imaging analysis to detect defects in buildings, industrial facilities or solar panels
  • Precision agriculture and forestry

Fully integrated solution from a single source
Aibotix works closely with other Hexagon brands, such as Leica Geosystems, to fully integrate systems and workflows for data generation and processing.

  Technical data Aibot X6
 Length/ Width/ Heigth
 1.05 x 1.05 x 0.45 m
 Housing  CFRP (Carbon Fiber Reinforced Polymer)
 Dead Weight
 3.4 kg
 Take-off weight
 4.6 – 6.6 kg
 Max. payload1
 2.0 kg
 Max. speed1
 40 km/h (25 mph)
 Climb rate1
 8 m/s
 Fleight height2
 Up to 500m (1,640 ft.) over ground, up to 3,000 m (9,843 ft.) above sea level start point
 RC range
 Up to 1,000 m, fly always in line-of-sight
 Flight time1
 Up to 20 min
 Operating temperature
 -20° C to 40° C (-4° F to 104° F)
 RTK  Yes
 Gyroscope  Yes
 Accelerometer  Yes
 Barometer  Yes
 Magnetometer  Yes
 Ultrasonic sensors
 Standard sensors
 Sony ILCE-6000, Sony ILCE-7R, Workswell WIRIS 640, Parrot Sequoia, Headwall Nano-Hyperspec
 Control  Remore control, automatic waypoint flight
 Batteries  Lithium-polymer 10,000 mAh
 Software  Aibotix AiProFlight
 Service  Service team, hotline, pilot training
 Sets + Equipment
 On-top camera mounting, digital live video Aibotix Ai DLVP, standard sensors, RTK Aibot HP GNSS 2
1 Depending on operating mode, weather and payload
2 Up to 3,000 m above sea level